Network Security > Packet Filter > Overview
Network Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
155
Source Port Displays the source port of the data packets to which the device applies
the rule.
Possible values:
any
The device applies the rule to every data packet without considering
the source port.
1..65535
The device applies the rule exclusively to data packets containing the
specified source port.
Destination
Address
Specifies the destination address of the data packets to which the device
applies the rule.
Possible values:
any
(default setting)
The device applies the rule to data packets with any destination
address.
Valid IPv4 address
The device applies the rule to data packets with the specified
destination address.
Valid IPv4 address and netmask in CIDR notation
The device applies the rule to data packets with the specified
destination address in the specified subnet.
An exclamation mark (
!
) preceding the IP address reverses the
expression into its opposite. The device applies the rule to data
packets which do not contain the destination address specified here.
Destination Port Displays the destination port of the data packets to which the device
applies the rule.
Possible values:
any
The device applies the rule to every data packet without considering
the destination port.
1..65535
The device applies the rule exclusively to data packets containing the
specified destination port.
Parameters Meaning
To Next Page
Loading...