Network Security > Packet Filter > Overview
Network Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
157
Port
Action Displays how the device handles received data packets.
Possible values:
accept
The device accepts the data packets.
drop
The device drops the data packets.
reject
The device rejects the data packets.
Log Displays whether the device places an entry in the log file (system log)
when it applies the rule to a data packet.
Possible values:
marked
The device places an entry in the log file (system log) when it applies
the rule to a data packet.
unmarked
Logging is disabled.
Trap Displays whether the device sends an SNMP trap when it applies the rule
to a data packet.
Possible values:
marked
The device sends a SNMP trap.
unmarked
The device does not send a SNMP trap.
The prerequisite for sending SNMP traps is that you enable the function in
the
Diagnostics > Status Configuration > Alarms (Traps)
dialog and
specify at least 1 SNMP manager.
Parameters Meaning
Port Specifies which rules the table displays.
Possible values:
All
The table displays all the rules.
<Port number>
The table displays the rules that apply for the selected port.
Parameters Meaning
To Next Page
Loading...