Virtual Private Network > Connections
Virtual Private Network
232
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Endpoint and Traffic Selectors
Parameters Meaning
Endpoints
Local Gateway Specifies the hostname or IP address of the local IPsec VPN tunnel
endpoint.
Possible values:
any
(default setting)
If you enter the value any, then the device uses the IP address of the
interface the device uses to forward data to the remote endpoint.
valid IPv4 address and netmask
hostname
alphanumeric ASCII character string with 0..128 characters. When
you enter a hostname the device allows you to use 'CR LF' or 'CR
NUL' in the character string. When you specify a hostname, then the
device delays the VPN tunnel until it receives an IP address for the
hostname.
Remote Gateway Specifies the hostname or IP address of the remote IPsec VPN tunnel
endpoint.
Possible values:
any
(default setting)
When you enter the value
any
, then the device accepts any IP address
when establishing an IKE-SA as a VPN responder.
valid IPv4 Address and netmask
If you specify that the device is a responder for this VPN tunnel, then
the device accepts a network in CIDR notation, during IKE-SA
establishment.
hostname
alphanumeric ASCII character string with 0..128 characters. When
you enter a hostname the device allows you to use 'CR LF' or 'CR
NUL' in the character string.
When you specify a hostname, then the device delays the VPN tunnel
until it receives an IP address for the hostname.
Parameters Meaning
Traffic Selectors
Index Displays the traffic selector index of the VPN tunnel. The device allows
you to specify any available number within the given range.
Possible values:
1..16
Description Displays the user-defined description for the traffic selector.
Possible values:
alphanumeric ASCII character string with 1..128 characters.
To Next Page
Loading...