Graphical User Interface
24
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Status line
The status line is located in the top part of the menu section.
Figure 6: Status line
The status line contains the following buttons:
Button Meaning
Refreshes the status line. The buttons display the values loaded from the volatile
memory (
RAM
) of the device.
Terminates the refreshing of the status line.
When you position the mouse pointer over the button, the user interface opens
a bubble help with the following information:
Time at which the device last updated the values
Name of the logged in user
Device name
Network protocol through which you are logged in to the device
The device automatically updates the values once a minute. To update the
display manually, click the button.
By right-clicking this symbol you have the option of opening the
Basic
Settings > System
dialog and the
Basic Settings > Network
dialog directly.
When you position the mouse pointer over the button, the user interface opens
a bubble help with the summary of the
Diagnostics > System > Configuration
Check
dialog.
To update the display, click the button.
By right-clicking this symbol you can open the
Diagnostics > System >
Configuration Check dialog directly.
Ends the session and terminates the connection to the device.
Table 4: Buttons in the status line
To Next Page
Loading...