Routing > OSPF > Global
Routing
302
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Shortest Path First
New LSA originated Displays the number of new link state advertisements originated on this
router. The router increments this number each time it originates a new
Link State Advertisement (LSA).
LSAs received Displays the number of LSAs received that the router determined to be
new instances. This number also excludes newer instances of self-
originated LSAs.
Parameters Meaning
Delay Time [s] Specifies the delay time, in seconds, between when the router receives a
topology change and when it starts an SPF calculation.
Possible values:
0..65535
(default setting:
5
)
The value
0
means that the router immediately begins the SPF
calculation after receiving the topology change.
Hold Time [s] Specifies the minimum time, in seconds, between consecutive SPF
calculations.
Possible values:
0..65535
(default setting:
10
)
The value
0
means that after the router completes an SPF calculation
it immediately begins the next consecutive SPF calculation.
Exit Overflow
Interval [s]
Specifies the number of seconds, after entering the overflow state, that a
router attempts to leave the overflow state. When the router leaves the
overflow state it transmits new non-default AS-external-LSAs.
Possible values:
0..2147483647
(default setting:
0
)
The value
0
means that the router remains in the Overflow-State until
restarted.
Parameters Meaning
To Next Page
Loading...