Routing > OSPF > Stub Areas
Routing
314
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
Metric Type Specifies the type of metric used for the default route advertised into the
area.
The border router of a stub area advertises a default route as a network
summary LSA.
Possible values:
ospf metric
(default setting)
The ABR advertises the metric as OSPF internal, which is the cost of an
intra-area route to the ABR.
comparableCost
The ABR advertises the metric as external type 1, which is the cost of
the OSPF internal metric plus external metric to the ASBR.
nonComparable
The ABR advertises the metric as external type 2, which is the cost of
the external metric to the ASBR. You use this value for NSSAs.
Totally Stub Activates/deactivates importation of summary-LSAs into the stub areas.
Possible values:
marked
The router does not import area summaries, the stub area relies entirely
on the default route making it a Totally Stub Area.
unmarked
(default setting)
The router summarizes and propagates summary LSAs into the stub
area.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...