Routing > OSPF > NSSA
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
317
Buttons
Translator Status Displays if and how the router is translating type-7 LSAs into type-5 LSAs.
Possible values:
enabled
The "Translator Role" of the router is set to
always
.
elected
As a candidate, the NSSA Border router is translating type-7 LSAs into
type-5.
disabled
Another NSSA border router is translating type-7 LSAs into type-5
LSAs.
Translator
Stability Interval
[s]
Specifies the number of seconds after the router losses a translation
election that it continues to translate type-7 LSAs into type-5 LSAs.
Possible values:
0..65535
(default setting:
40
)
Translator Events Displays the number of translator status changes that have occurred since
the last boot-up.
Discontinuities in the value of this counter occur while OSPF is disabled and
can occur during re-initialization of the management system.
Totally NSSA Activates/deactivates importation of summary routes into the NSSA as
type 3 summary LSAs.
Possible values:
marked
The router suppresses summary route importation making the area a
Totally NSSA.
unmarked
(default setting)
The router imports summary routes into the NSSA as type 3 summary
LSAs.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...