Routing > OSPF > Virtual Links
Routing
326
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Auth Key Specifies the
simple
authentication key value.
When you set the authentication key to
simple
, and you specify the key
length shorter than 8 octets, then the agent left adjusts the value and fills the
remaining octets with zeros.
The prerequisite for specifying this value is that you specify the "Auth Type"
as
simple
.
Possible values:
0..256
(default setting:
00 00 00 00 00 00 00 00
)
Auth Type Specifies the authentication type for an interface.
When you specify
simple
or
md5
, then this router requires other routers to
pass an authentication process before this router accepts it as a neighbor.
When you use authentication to help protect your network, use the same
type and key for every router in your autonomous system.
When you set the "Auth Type" parameter to simple the device uses only 8
characters and when set to
md5
the device uses 16 characters.
Possible values:
0
=
none
(default setting)
Network authentication is inactive.
1
=
simple
The router uses clear text authentication. In this case, routers transmit
the passwords as clear text.
2
=
md5
The router uses the message-digest algorithm MD5 authentication. This
type of authentication helps make your network more secure.
Auth Key ID Specifies the
md5
Authentication Key ID value.
The cryptographic authentication option md5, helps protect your network
against passive attacks and helps provide significant protection against
active attacks.
The prerequisite for specifying this value is that you specify the "Auth Type"
as
md5
.
Possible values:
0..255
(default setting:
0
)
Parameters Meaning
To Next Page
Loading...