Routing > OSPF > Diagnostics
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
335
Table
Parameters Meaning
Area ID Displays the area ID from which router received the LSA.
Possible values:
area ID
Type Displays the type of the LSAs received.
Each LSA type has a separate advertisement format.
Possible values:
routerLink
The value indicates that the router received the information in this row
from another router in the same area. Routers announce their existence
and list the links to other routers within the same area using a type 1
LSA. The link state ID is the originating router ID.
networkLink
The value indicates that the router received the information in this row
from a DR on a broadcast segment using a type 2 LSA. The DR
compiles the information received in type 1 LSAs and lists the routers
linked together by the segment. The link state ID is the IP interface
address of the DR.
summaryLink
The value indicates that the router received the information in this row
from an ABR using a type 3 LSA describing routes to networks. ABRs
compile information learned from type 1 and type 2 LSAs received from
the attached areas before sending the routing information to the other
areas. The link state ID is the destination network number which is the
results of the summarization process.
asSummaryLink
The value indicates that the router received the information in this row
from an ABR using a type 4 LSA describing routes to ASBRs. ABRs
compile information learned from type 1 and type 2 LSAs received from
the attached areas before sending the routing information to the other
areas. The link state ID is the destination network number.
asExternalLink
The value indicates that the router received the information in this row
from an ASBR using a type 5 LSA describing routes to another AS. The
link state ID is the router id of the ASBR.
nssaExternalLink
The value indicates that the router received the information in this row
from a router in a nssa using a type 7 LSA.
LSID Displays the Link State ID (LSID) value received in the LSA.
The LSID is a field located in the LSA header. The field contains either a
Router ID or an IP Address according to the LSA type.
Possible values:
Valid router ID or IP address
Router ID Displays the router ID uniquely identifying the originating router.
Possible values:
router ID
To Next Page
Loading...