Routing > OSPF > Diagnostics
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
343
Buttons
Length of
Retransmission
queue
Displays the length of the retransmission list.
In order to flood LSAs out of an interface to the neighbor, the router places
the LSAs on the link state retransmission list of the adjacency. To validate
LSA flooding, the router retransmits the LSAs until the neighbor
acknowledges the LSA reception. You configure the length of time between
retransmissions in the
Routing > OSPF > OSPF Interfaces
in the "Retrans
Interval [s]" field of the interface.
Suppressed
Hellos
Displays whether the router is suppressing hello packets to the neighbor.
Suppressing hello packet transmission to the neighbor allows demand
circuits to close, on point-to-point links, during periods of inactivity. In NBMA
networks, the periodic transmission of LSAs causes the circuit to remain
open.
Possible values:
marked
The router suppresses hello packets.
unmarked
The router transmits hello packets.
Button Meaning
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...