Routing > L3-Redundancy > VRRP > Configuration
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
367
Edit Entry – VRRP
Parameters Meaning
Port Specifies the port number to which the table entry relates.
Possible values:
available ports
VRID Specifies the Virtual Router IDentifier.
A virtual router uses
00-00-5E-00-01-XX
as its MAC address. The value
specified here replaces the last octet (
XX
) in the MAC address. Assign a
unique value to every physical router within a virtual router instance. The
device changes the effective priority value to
255
for a physical router with
the same IP address as the virtual router.
Possible values:
1..255
Parameters Meaning
Operation
Active When you enable the function, the "VRRP" redundancy is active globally
on the device.
Possible values:
"Off" (default setting)
The "VRRP" function is disabled.
"On"
The "VRRP" function is enabled.
Parameters Meaning
Information
Port Displays the port number to which the entry relates.
VRID Displays the Virtual Router IDentifier.
Parameters Meaning
Configuration
Base Priority Specifies the priority of the virtual router. The value differs from "Priority"
if tracked objects are down or the virtual router is the IP address owner.
Possible values:
1..254
(default value:
100
)
When you configure multiple VRRP routers in a single instance, distribute
the priority values uniformly on the routers. For example, assign the
priority value of
50
to the primary router, the value of
100
to the next router.
Repeat the steps with the value
150
, and so on.
To Next Page
Loading...