Routing > NAT > Destination NAT > Mapping
Routing
394
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
Priority Specifies the priority of the NAT rule.
Using the priority, you specify the order in which the device applies several
rules to the data stream. The device applies the rules in ascending order
starting with priority 1.
Possible values:
1..6500
(default setting:
1
)
Active Activates/deactivates the assignment. You use this function to temporarily
disable the assignment without it being necessary to reassign NAT rules
and router interfaces to each other.
Possible values:
marked
The assignment is active.
unmarked
(default setting)
The assignment is inactive. The settings are saved in the device.
To apply the changes to the data stream, click in the
Routing > NAT > NAT
Global
dialog the "Commit Changes" button.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Assign Opens the "Assign" dialog. In this dialog, you assign a configured router
interface of an existing NAT rule.
Remove Removes the highlighted table entry.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...