Diagnostics > Status Configuration > Signal Contact > Signal Contact 1
Diagnostics
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
437
Signal Contact Status
To update the status of the contact in this dialog first select the mode, then
click the "Set" and "Reload" button.
The signal contact displays the device status if you have selected the
"Device Status" value from the "Mode" drop-down list in the
"Configuration" frame.
Trap Configuration
Parameters Meaning
Signal Contact
Status
Displays the status of the signal contact. The signal contact displays the
device status or the security status.
Possible values:
"Opened (Error)"
The signal contact is opened.
– The current status of the device has the value "Error".
or
– The current status of the security-relevant settings in the device
has the value "Error".
"Closed (Ok)"
Normal status. The signal contact is closed.
Parameters Meaning
Generate Trap Activates/deactivates sending an SNMP trap when the device detects
changes in the monitored functions.
Possible values:
marked
The device sends an SNMP trap when the device detects a change in
the monitored functions..
unmarked
(default setting)
The sending of SNMP traps is deactivated.
The prerequisite for sending SNMP traps is that you enable the function in
the
Diagnostics > Status Configuration > Alarms (Traps)
dialog and
specify at least 1 SNMP manager.
To Next Page
Loading...