Hirschmann HiSecOS EAGLE30 - Page 443

Diagnostics > Status Configuration > Alarms (Traps)
Diagnostics
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
443
 Buttons
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Create Opens the "Create" dialog to add a new entry to the table.
 In the "Name" field you specify a name for the SNMP manager.
 In the "Address" field you specify the IP address and the port number
of the SNMP manager.
If you choose not to enter a port number, the device automatically
adds the port number
162 .
Remove Removes the highlighted table entry.
Help Opens the online help.