Diagnostics > LLDP > Configuration
Diagnostics
458
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Transmit System
Name
Activates/deactivates the transmitting of a TLV (Type Length Value) with
the device name.
Possible values:
marked
(default setting)
The transmitting of the TLV is active.
The device transmits the TLV with the device name.
unmarked
The transmitting of the TLV is inactive.
The device does not transmit a TLV with the device name.
Transmit System
Description
Activates/deactivates the transmitting of the TLV (Type Length Value) with
the system description.
Possible values:
marked
(default setting)
The transmitting of the TLV is active.
The device transmits the TLV with the system description.
unmarked
The transmitting of the TLV is inactive.
The device does not transmit a TLV with the system description.
Transmit System
Capabilities
Activates/deactivates the transmitting of the TLV (Type Length Value) with
the system capabilities.
Possible values:
marked
(default setting)
The transmitting of the TLV is active.
The device transmits the TLV with the system capabilities.
unmarked
The transmitting of the TLV is inactive.
The device does not transmit a TLV with the system capabilities.
Max Neighbors Limits the number of neighboring devices to be recorded for this port.
Possible values:
1..50
(default setting:
10
)
FDB Mode Specifies which function the device uses to record neighboring devices on
this port.
Possible values:
lldpOnly
The device uses LLDP data packets exclusively to record neighboring
devices on this port.
macOnly
The device uses learned MAC addresses to record neighboring
devices on this port. The device uses the MAC address exclusively if
there is no other entry in the address table (FDB, Forwarding
Database) for this port.
both
The device uses LLDP data packets and learned MAC addresses to
record neighboring devices on this port.
autoDetect
(default setting)
If the device receives LLDP data packets at this port, the device works
the same as with the
lldpOnly
setting. Otherwise, the device works
the same as with the
macOnly
setting.
Parameters Meaning
To Next Page
Loading...