Basic Settings > Load/Save
Basic Settings
54
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Save As... Copies the configuration profile highlighted in the table and saves it with a
user-defined name in the non-volatile memory (
NVM
). The device
designates the new configuration profile as “Selected”.
Note: Before creating additional configuration profiles, decide for or
against permanently activated configuration encryption in the device.
Save additional configuration profiles either unencrypted or encrypted with
the same password.
If in the
Basic Settings > External Memory
dialog the checkbox in the
"Auto-save config on external memory" column is marked, the device
designates the configuration profile of the same name on the external
memory as “Selected”.
Back to factory
defaults...
Resets the settings in the device to the default values.
The device deletes the saved configuration profiles from the volatile
memory (
RAM
) and from the non-volatile memory (
NVM
).
If an external memory is connected, the device deletes the
configuration profiles saved on the external memory.
After a brief period, the device reboots and loads the default values.
Help Opens the online help.
Button Meaning
To Next Page
Loading...