Basic Settings > External Memory
Basic Settings
56
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Enable Automatic
Software Update
Activates/deactivates the automatic device software update during the
restart.
Possible values:
marked
(default setting)
The automatic device software update during the restart is activated.
The device updates the device software when the following files are
located in the external memory:
– the image file of the device software
– a text file "startup.txt" with the content
autoUpdate=<image_file_name>.bin
unmarked
The automatic device software update during the restart is
deactivated.
Config Priority Specifies the memory from which the device loads the configuration profile
upon reboot.
Possible values:
disable
The device loads the configuration profile from the non-volatile
memory (
NVM
).
first
,
second
The device loads the configuration profile from the external memory
designated as
first
. If the device does not find a configuration profile
there, it loads the configuration profile from the external memory
designated as
second
, and so on.
If the device does not find a configuration profile on the external
memory, it loads the configuration profile from the non-volatile
memory (
NVM
).
Note: When loading the configuration profile from the external memory
(ENVM), the device overwrites the settings of the Selected configuration
profile in the non-volatile memory (NVM).
If the field in the "Config Priority" column has the value
first
or
second
and the configuration profile is unencrypted, the "Security Status" frame in
the
Basic Settings > System
dialog displays an alarm.
In the
Diagnostics > Status Configuration > Security Status
dialog,
"Global" tab, "Monitor" column you specify whether the device monitors
the "Load unencrypted config from external memory" parameter.
Auto-save config on
external memory
Activates/deactivates creating a copy of the configuration profile on the
external memory.
Possible values:
marked
(default setting)
Creating a copy is activated. If you click in the
Basic Settings >
Load/Save dialog the "Save" button, the device generates a copy of
the configuration profile on the active external memory.
unmarked
Creating a copy is deactivated. The device does not generate a copy
of the configuration profile.
Parameters Meaning
To Next Page
Loading...