Device Security > LDAP > Configuration
Device Security
94
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
Server Status Displays the connection status and the authentication with the
authentication server.
Possible values:
ok
The server is reachable.
If in the "Connection Security" row a value other than
none
is
specified, the device has verified the certificate of the server.
unreachable
Server is unreachable.
other
The device has not established a connection to the server yet.
Active Activates/deactivates the use of the server.
Possible values:
unmarked
(default setting)
The device does not use the server.
marked
The device uses the server.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Create Adds a new table entry.
Remove Removes the highlighted table entry.
Flush Cache Removes the cached log on data of the successfully logged on users.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...