Device Security > LDAP > Role Mapping
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
97
Buttons
Parameter Specifies a group or an attribute with an attribute value, depending on the
setting in the "Type" field.
Possible values:
Alphanumeric ASCII character string with 0..255 characters
The device differentiates between upper and lower case.
– If in the "Type" field the value
attribute
is specified, you enter
the attribute in the form of
Attribute_name=Attribute_value
.
Example:
l=Germany
– If in the "Type" field the value
group
is specified, you enter the
“Distinguished Name” (DN) of a group.
Example:
CN=admin-users,OU=Groups,DC=example,DC=com
Active Activates/deactivates the role mapping.
Possible values:
unmarked
The role mapping is inactive.
marked
(default setting)
The role mapping is active.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Create Opens the "Create" dialog to add a new entry to the table.
Remove Removes the highlighted table entry.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...