Figure 4-10 Maintenance mode on
Maintenance mode OFF for SMP CB 520X B1/B2/B3
1. Select Resources tab and select Modules > All Modules > Server
blades.
2. Click Action, and then select Maintenance mode OFF.
3. Click check boxes of the SMP blades that should be changed to
maintenance mode off, and then click Confirm.
4. The confirmation dialog box appears. Click OK.
5. Confirm that the highlights of the selected blades go out and the symbol
disappears.
Common process for replacement
4-13
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
