3. The CBTP start executing.
4. Confirm that the test ended and Normal End is indicated in each device.
Figure 8-13 Testing hardware
Note: One full screen may be too small to display all of the device
information.
Verify the results using the ↑ and ↓ keys.
Note: When the abnormal end, Error end, is displayed, consult with Hitachi
Data Systems Customer Support team.
Closing the test program
1. Using the ← and → keys, select CLOSE, and then press Enter key. The
window returns to the main menu.
2. Select Power Off, and then press Enter key.
3. Power Off dialog appears. Select OK, and then press Enter key.
4. The CBTP end processing is displayed. When the shutdown process was
successful, the power LED on server blade blinks in green.
5. Click File and select Exit.
8-14
Diagnosing server blade
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
