Server model Firmware version
CB 540A A1/B1 03-20 or later
When the firmware version of management module is A0179 or earlier, or the
firmware version of server blade is as follows, finish the restoring CNA
configuration information.
Server model Firmware version
CB 520H A1/B1 01-69 or earlier
CB 520A A1 02-37 or earlier
CB 540A A1/B1 03-19 or earlier
Restoring backed up CNA information
This procedure shall be performed when the server model is CB 520H
B2/B3/B4 CB 520X B1/B2/B3.
Also, this procedure shall be performed when the firmware version of
management module is A0180 or later, and the firmware version of server
blade is as follows.
Server model Firmware version
CB 520H A1/B1 01-70 or later
CB 520A A1 02-38 or later
CB 540A A1/B1 03-20 or later
1. Click Action > Restore CNA card information in Web console.
7-104
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
