10. Put down the PCI expansion blade with server blade, and then lift up the
PCI expansion blade from the shelf.
Figure 5-37 Removing the PCI expansion blade from the shelf
Installing a PCI expansion blade on the shelf
1. Put on an anti-static wrist strap.
2. Align the PCI expansion blade onto the position indicated with blue circles
in the following figure, and then put the PCI expansion on the shelf.
3. Slide the PCI expansion blade toward the server blade until it fixes.
(Confirm that the PCI expansion blade does not slide toward opposite
side.)
4. Open the top cover of the PCI expansion blade.
See
Opening a top cover, PCI expansion blade on page 5-40 section.
5-32
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
