8. Enter < IP Address > for console PC, and then press Enter key.
9. Enter upload, and then press Enter key.
10. Enter < download file name.txt>, and then press Enter key.
11. Enter all, and then press Enter key.
12. The CAUTION message is displayed.
13. Enter y, and then press Enter key.
14. Enter password, and then press Enter key.
15. The following message is displayed.
10Gb DCB switch module
To back up the configuration data;
1. Click Start > Programs > Accessories > Communications >
HyperTerminal to boot up terminal software.
2. The Connection Description window is displayed. Enter telnet1, and
then click OK.
3. Select TCP/IP (Winsock), enter < IP address > in the Host address
box, and then click OK.
Common process for replacement
4-41
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
