To restore the configuration data
1. Select Resources tab and select Modules > All Modules >
Management modules.
2. Click Action and then select Restore Settings.
3. The restore dialog box appears. Check Specify backup file and browse
the backup file name, or check Use backup in storage made on
following date and time.
4. Click Confirm.
5. The confirmation dialog box appears. Click OK. The firmware restore
process will start.
Figure 4-33 Restore the configuration data for management
module
6. After the firmware restore process has completed, the successful message
dialog box appears. Click Close.
7. The management module will reboot automatically.
4-34
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
