Hitachi CB 520H B3 - Page 154

□
Replacing a USB enablement kit and USB in CB 520H A1/B1/B2
□
Replacing a USB in CB 520X B1/B2/B3
□
Replacing a SD card enablement kit and SD card in CB 520H B3/B4
□
Replacing a mezzanine card in the storage expansion blade
□
Replacing a PCI card in storage expansion blade
□
Replacing a mezzanine card in the PCI expansion blade
□
Replacing a PCIe card in the PCI expansion blade
□
Replacing a lithium battery in half-wide server blade
□
Replacing a lithium battery in full-wide server blade
□
Replacing a SAS-kit 1 in half-wide server blade
□
Replacing a SAS-kit 1 in full-wide server blade
□
Replacing a SAS-kit 2 in half-wide server blade
□
Replacing a SAS-kit 2 in CB 540A A1/B1
□
Replacing a SAS HDD kit in CB 520X B1/B2/B3
□
Replacing a management module (redundant)
□
Replacing a management module (non-redundant)
□
Replacing a lithium battery in management module
□
Replacing a switch module
□
Replacing a LAN pass through module, LAN pass through module2
□
Replacing an SFP+ module
□
Replacing a memory card for LAN switch module
□
Replacing a USB memory for 8Gb FC switch module
5-2
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual