2. The following message is displayed. Confirm that Vendor: BROCADE is
indicated in the replaced port(s).
[8Gb FC switch module]
[16Gb FC switch module]
3. Enter exit, and then press Enter key.
To check the SFP function for 10Gb DCB switch module;
1. Enter show interface tengigabitethernet 0/<x>, and then press
Enter key.
<x>: Port number of the replaced SFP module
2. The following message is displayed. Confirm that Pluggable media
present is indicated in the replaced port(s).
3. Enter exit, and then press Enter key.
5-118
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
