7. Enter appropriate number corresponding to the recorded setting before
the replacement, and then press Enter.
Press Esc to return to the previous window.
8. Repeat step 6 and step 7 while changing the selecting items in step 6 to
restore the recorded settings of PLOGI Retry Timer, Topology, Spinup
Delay, Auto Scan Setting, EDD 3.0, Start Unit Command,
Environment Variable, Auto Boot Sector, and Link Speed.
7-26
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
