Select Resources tab on the web console and select Modules > All
Modules > Server Blades > a target module that should be
diagnosed.
[For SMP CB 520X B1/B2/B3]
Select Resources tab on the web console and select Modules > All
Modules > Server Blades > Server Blade n of the SMP
configuration > Server Blade n (Primary) that should be diagnosed.
2. Select Condition tab.
3. Click Server blade Action and select Start remote console.
4. The remote console window is displayed.
Figure 8-2 Starting the remote console
Figure 8-3 Remote console window
Note: When the type of server blade is CB 520H A1/B1 with BMC of
before 01-27, the login screen of Web console is displayed. Login and
start the remote console. For login procedure, see
Starting remote
console by using server blade Web console. on page 8-5.
Diagnosing server blade
8-3
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
