When Network Error above is displayed, change the JAVA settings by
following steps.
(1) Open Control panel in Windows, and then open JAVA Control
Panel in Control panel.
(2) Select Security tab in JAVA Control Panel, and then select Manage
Certificates ....
(3) Select Trusted Certificates in Certificate type text box in
Certificate dialog box, and then select User tab.
Select a certificate line, which Issued To and Issued By indicate target
server blade IP address, and then click Remove.
(4) Click OK in Confirmation - Remove Certificate? dialog box.
(5) After changing the JAVA setting, retry from "
Connecting the remote
console on page 8-2" again.
Tip: Do not close the Virtual Media Session window until the diagnostic
procedure is completed.
4. Select Date and Time, and then press Enter key.
5. The date and time window is displayed. Confirm System Date and
System Time, and then write down the date and time. Press Esc key.
8-8
Diagnosing server blade
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
