Item Function
Demand Function Setting This function is to select the action at “Demand Function” control.
Selecting Group for De-
mand Function
This function is to select the target group for “Demand Function” control.
Button Setting
This function species each button to be shown/hidden.
This function also includes specication/setting for “one-tap operation” or “press and hold” operation.
Contact Information Reg-
ister
This function is used for editing the contents of contact information registration.
Restore Setting This function is used for restoring all the settings such as registered Groups (Blocks) and schedules.
Checking Connection
This function is used for checking of the connected indoor unit numbers in the same H-LINK.
When this function is used, the conrmation for the keeping of registered information such as the group
names, schedules, etc. will be indicated.
If “OK” is tapped, the connected indoor unit numbers are updated with keeping the registered informa-
tion. If “Cancel” is tapped, the setting of the central station is all restored.
Alarm History
This function is used for displaying the list of alarm history that occurred in the air conditioner and the
controller. (Maximum 100 records)
5 Centralised remote controls
PSC-A64GT
TCGB0106 rev.0 - 12/2014
229
5
To Next Page
Loading...
