Adjusting Date/Time
1 Select “Adjusting Date/Time” from the screen of “Menu”.
2 Tap or press-and-hold “
” or “ ” to adjust the date and time.
3 Tap “Done” to return to the screen of “Monitor 1 (All Groups)” or “Monitor 2 (Block)”.
Menu
25/01/2010 (Mon) 10:20
Filter Sign Reset Schedule Setting
Adjusting
Date/Time
Touchscreen
Cleaning
Touchscreen
Calibration
Group Name
Register
Screen Display
Setting
Accumulated
Operation
Time
Contact
Information
Service Menu
(1)
yy mm dd hh mm
Date/Time
Done
10 2025012010
25/01/2010 (Mon) 10:20
(2)
(3)
NOTE
• According to the backup function of the central station, the clock works for 10 days (approx.) after the electric power failure. Set the
date and time again after long-term electric power failure.
• Periodical clock adjustment is Recommended. (Clock accuracy: difference +70 sec. per month).
Touchscreen Cleaning
1 Select “Touchscreen Cleaning” from the screen of “Menu”.
2 The screen will be changed as shown in the gure (2).
The screen will be locked until “Exit” is pressed and held for at least 3 seconds.
Clean the touchscreen display while the screen is locked.
3 Press and hold “Exit” for at least 3 seconds to return to the screen of “Monitor 1 (All Groups)” or “Monitor 2 (Block)”.
Menu
25/01/2010 (Mon) 10:20
Filter Sign Reset Schedule Setting
Adjusting
Date/Time
Touchscreen
Cleaning
Touchscreen
Calibration
Group Name
Register
Screen Display
Setting
Accumulated
Operation
Time
Contact
Information
Service Menu
(1)
After cleaning, press and hold “Exit”
button for at least 3 seconds.
Exit
(2)
(3)
NOTE
• Clean and wipe the display with dry and soft cloth.
• For oil and fat on the touchscreen such as nger print marks, use diluted neutral detergent. Before cleaning, wring water out to dry.
After that, again wipe the display with dry and soft cloth.
• Do not use benzine, thinner or surface active agent in order to protect the touchscreen and body from deformation or deterioration.
5 Centralised remote controls
PSC-A64GT
TCGB0106 rev.0 - 12/2014
261
5
To Next Page
Loading...
