Touchscreen Calibration
1 Select “Touchscreen Calibration” from the screen of “Menu”.
Menu
25/01/2010 (Mon) 10:20
Filter Sign Reset Schedule Setting
Adjusting
Date/Time
Touchscreen
Cleaning
Touchscreen
Calibration
Group Name
Register
Screen Display
Setting
Accumulated
Operation
Time
Contact
Information
Service Menu
(1)
2 Calibrating touchscreen
Tap every intersections of white lines sequentially indicated on the screen.
After that, the screen will be changed to (3).
If the intersections of white lines are not recognized normally, “Calibration is cancelled” will be displayed on the screen.
And then, the screen will automatically return to the screen of “Monitor 1 (All Groups)” or “Monitor 2 (Block)” without cali-
brating.
Calibrating of touchscreen.
Tap the intersection of white lines.
(2)
3 “Checking tap position of touchscreen”
Touch the intersection of white lines sequentially according to the screen indication.
The white dots will be indicated when tapping other than the intersection of white lines.
When every intersections of white lines are normally recognized, the screen will automatically return to the screen of
“Monitor 1 (All Groups)” or “Monitor 2 (Block)”.
Checking tap position of touchscreen.
Tap the intersection of white lines.
(3)
5 Centralised remote controls
PSC-A64GT
TCGB0106 rev.0 - 12/2014
262
To Next Page
Loading...
