Hitachi PSC-A1T - Page 290

1 Select “Optional Function Setting” on the “Service Menu” screen when the air conditioners are not in operation.
NOTE
This function cannot be selected when the air conditioner is operating.
2 Select the target groups or block for “Optional Function Setting” by tapping “All Groups”, “Block” or “Group”.
• Select “All Groups” for the optional function setting when the following item settings are changed.
• Operation mode
• Display of Accumulated Operation Time
Back
Service Menu
25/01/2010 (Mon) 10:20
Group Register
Optional Function
Setting
Exception Setting
of Run/Stop
Operation
External
Input/Output Setting
Exception
External Input
Demand Function
Setting
Button Setting
Alarm History
Checking
Connection
Restore Setting
Contact Info.
Register
(1)
Optional Function Setting
Back
25/01/2010 (Mon) 10:20
F-Level
1-B
F-Level
1-A
F-Level
2
Annex
All Groups
Group1A-03
Group1A-05
Group1A-07
Group1A-09
Group1A-11
Group1A-13
Group1A-15
Group1A-02
Group1A-04
Group1A-06
Group1A-08
Group1A-10
Group1A-12
Group1A-14
Buffet 1
North Area
Buffet 1
South Area
Buffet 1
East Area
Buffet 1
West Area
Buffet 2
North Area
Buffet 2
South Area
Buffet 2
East Area
Buffet 2
West Area
Meeting
Room A
Meeting
Room B
Meeting
Room C
Meeting
Room E
Meeting
Room D
Kiosk
Group1A-16
Group1B-03
Group1B-05
Group1B-07
Group1B-09
Group1B-11
Group1B-13
Group1B-02
Group1B-01
Group1B-04
Group1B-06
Group1B-08
Group1B-10
Group1B-12
Group2-01
Group2-03
Group2-05
Group2-07
Group2-09
Group2-11
Group2-02
Group2-04
Group2-06
Group2-08
Group2-10
Group1A-01
(2)
3 Select “Enable” or “Disable” for the each function.
The button colour of selected function is changed to yellow
with orange rim.
Proceed to select the optional function setting depending on
the setting afterwards.
Set the optional function of other group. (4)
Exit the optional function setting. (5)
4 Tap “Back” to return to the screen of “Optional Function
Setting”. Repeat (2) and (3) to set “Optional Function Set-
ting”.
5 Tap “Done” to nish this setting. The screen is returned to
“Service Menu”.
Done
Back
Optional Function
Setting
Fixing
Operation Mode
Fixing
Temperature
Setting
Cooling Only
Auto
Fixing Fan Speed
Enable
Enable
Enable
Enable
Enable
Display of
Accumulated
Operation Time
Control Mode
RCS Operation is
Prohibited to set
OFF time
Enable
Run/Stop
Only
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Normal
Enable
25/01/2010 (Mon) 10:20
F-Level 1-B
Group1B-03
(3)
(5)
(4)
5 Centralised remote controls
PSC-A64GT
TCGB0106 rev.0 - 12/2014
274