Hitachi PSC-A1T - Page 345


Filter Sign Reset
1 Select “Filter Sign Reset” at the “Menu” screen. (This is available only when the lter sign is indicated)
(1)
2 Select the target to reset the lter sign.
• Tap “Display with Sign” to indicate only the groups with lter sign.
• The target groups are indicated in yellow.
• When selected, a “
” sign appears on the group button.
(3)
(2)
(4)
3 Tap “Execute reset”.
4 Tap “OK” on the conrmation window, to reset the display of the lter sign and the operation time.
• Tap “Cancel” to return to the “Filter Sign Reset” screen.
• After resetting lter sign, the button becomes inactive.
5 Tap “Menu” to return to the “Menu” screen.
(5)
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
329
5