Hitachi PSC-A1T - Page 353

Schedule timer ON/OFF setting
1 Select “Schedule Settings” at the “Menu” screen.
2 Select “Schedule Timer ON/OFF Setting” at the “Schedule Settings” screen.
The screen changes to “Schedule Timer ON/OFF Setting”. The initial setting is “ON”, as indicated with the “
” mark.
(2)
3 Select the target (all groups, blocks or groups).
By tapping the button of all groups, blocks or groups, the setting changes to “OFF”, as indicated with the “
” mark.
• The buttons of the groups with schedule timer settings are shown in blue.
• The buttons of the groups with no schedule timer settings are shown in grey.
• Schedule is turned ON:
Schedule is turned OFF:
4 Tap “Setting Completed” to conrm the content of the settings and return to the “Schedule settings” screen.
(3)All Groups
(3) Block
(3) Group
(4)
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
337
5