Adjusting Date/Time
1 Select “Date and time Settings” at the “Menu” screen.
2 Tap or press-and-hold the “
” or “ ” buttons for each eld to adjust the date and time.
3 Tap “Setting completed” to return to the “Menu” screen.
(1)
(2)
(3)
NOTE
• The clock can keep working for approximately 10 days after an electric power failure thanks to the backup function of the central sta-
tion. It may be necessary to set the date and time again after a longer electric power failure.
• It is recommended to adjust the clock periodically. (Clock accuracy: ~70 s/month)
Touchscreen Cleaning
1 Select “Display of screen for cleaning” at the “Menu” screen.
2 The display is changed to the screen shown in gure (2). The screen becomes deactivated for cleaning. The display
returns to the “Menu” screen when the touchscreen is not touched for 10 seconds.
(1) (2)
NOTE
• Clean and wipe the LCD screen with a dry soft cloth.
• Use diluted neutral detergent to remove oil and fat such as ngerprint marks from the touchscreen. Wring water out to dry the cloth
before cleaning. After that, wipe the LCD screen again with a dry soft cloth.
• Do not use benzine, thinner or surface active agents in order to protect the touchscreen and its case from deformation or deterioration.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
339
5
To Next Page
Loading...
