Registration of names of groups and blocks
Registration of group or block name
1 Select “Group Name Register” at the “Menu” screen.
2 Select the target (block or group) to register its name.
(1) (2)
(7)
3 The display changes to the text input screen.
It is possible to choose between upper case, lower case and symbol keyboards.
4 Enter the name of the group or block and tap “Close” to store the entered name and return to “Group Name Register”.
5 Tap “Delete” to delete the character to the left of the current position of the cursor.
6 Tap “Register” to conrm the introduced name and return to the selection screen (2).
7 Tap “Menu” at the selection screen (2) to return to the “Menu” screen, after having registered all the group and block
names.
(3)
(6)
(5)
Enter Group Name
Block 1
Group 1
!@#£%"&^ () '?
123 4567890+-
QWERTYUI
€ASDFGHJ
<>ZXCVBN
OP */
KL ;:
M, .=
Space
Delete
Close
Symbol 1 Symbol 2Lower CaseUpper Case
MEETING ROOM
(4)
NOTE
• The names of groups and blocks may consist of a maximum of 16 characters. When the display of group and block names is restricted
to 8 characters per line, the 9th character appears at the beginning of the second line.
• The layout of the “Name Register” selection screen may be different depending on the control pattern.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
341
5
To Next Page
Loading...
