Button Setting
Button setting is used to select whether to show or hide certain operation buttons, thus restricting operation.
1
Select “Button Setting” on the screen of “Service Menu”.
2
Select the function concerning each items. The selected function appears highlighted in yellow.
3
Tap “Setting completed” to conrm the set contents and return to Service Menu screen.
(1)
(2)
(3)
Contact Information Register
This function is used to edit or register the displayed contact information.
1 Select “Contact Information Register” on the “Service Menu” screen.
(1)
2 Tap “Name Edition” or “TEL. No. Edition” buttons (2) to register the information corresponding to each eld of “Con-
tact Information 1” and “Contact Information 2”.
3 Enter the desired text at the keyboard screen.
(2)
NOTE
Only numbers and symbols are available at the key-
board when inserting telephone numbers.
4
The name elds have a maximum length of 50 characters.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
360
To Next Page
Loading...
Need help?
General
