5
Tap “Register” or “Cancel” to nish the edition, and return to the “Contact Information Register” screen.
6
Proceed to step 2 again to continue registering other elds or to step 7 to nish the setting.
7
Tap “Menu” to nish the setting and return to “Service Menu”.
(5)
(7)
Memo
Register memo
1 Select “Memo” on the “Service Menu” screen.
2 Select the target to register.
(1)
(2)
3 Enter the desired text at the keyboard screen.
4 The memo can have a maximum length of 52 characters.
5 Tap the buttons at the bottom of the screen to switch between upper and lower case and symbol keyboard.
6 Tap “Register” or “Cancel” to nish the edition, and return to the “Memo” screen.
(7)
(5)
(6)
7 Tap “Service Menu” to return to the “Service Menu” screen.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
361
5
To Next Page
Loading...
Need help?
General
