6 Building air conditioning controls
CSNET Manager LT/XT
TCGB0106 rev.0 - 12/2014
529529
6
Available data for Packaged
The available data for CSNET WEB can be checked on the CSNET WEB document.
Backup copy
This option lets you make a backup copy of the CSNET Manager parameters. The Backup button saves the conguration
in the le you choose of the computer from which you accessed the system.
The Restore button re-establishes the conguration stored in the le you have specied.
Conguration report
Conguration report prints on a text le all the settings that CSNET Manager has.
The purpose of that is in case of wrong behaviour of the functions, report the state and help to understand if there is
something not well congured. There are two different systems to dene the source of the consumed energy:
• Use congured power meter devices data: in case of having power meter devices related to the units, the energy
consumed per each indoor unit will be calculated based on the information provided by these devices.
• Enter the system consumption on the data period: in case of entering manually the consumption of the system in
the desired period, user enters the input reading data at the beginning and at the end of the period.
Current currency can also be specied.
The tariff table lets the user to set different time periods within a day with a related cost.
NOTE
The unit of measurement of the cost of a tariff period is the same than the input data reading. In case of using power meter device, the
unit of measurement should be the same than the specied on the power meter device conguration.
To Next Page
Loading...
Need help?
General
