6 Building air conditioning controls
CSNET Manager LT/XT
TCGB0106 rev.0 - 12/2014
535535
6
For each CS Port (available CSNET Manager server to connect):
- Name: Identication name for CSNET Manager server.
- Address: IP Address for CSNET Manager server.
- Port: Connection port where CSNET Manager server is listening.
- Proxy: Determine if communication with CSNET Manager server shall pass a proxy server.
- Password: Password for CSNET Manager. By default it is Installer.
Press
(Add) button in User List area to create a new user. At least a user needs to be created in order to connect
to an installation. “Edit User…” window will appear. Users may also be edited or deleted using
(Edit) or
(Delete) buttons respectively.
Enter desired user name and password. Also select the different privileges for the user. Note that user name may not be
repeated.
On unit selection, all the available units on CSNET Manager can be assigned to the current user. By click on congure, it
will appear a dialogue to specify which pattern describe the units for this user.
Unit sorting can also be congured.
NOTE
Unit ltering when there is a slave CSNET Manager is done on the slave CSNET Manager.
To Next Page
Loading...
Need help?
General
