126
Blockade Multiplier: 4
Graceful Restart: ENABLE
Restart Time: 200 sec Recovery Time: 150 sec
Table 49 Command output
Field Description
LSR ID Label switched Router ID, in the format of X.X.X.X
Resv Confirmation Request Reserved confirmation request
RSVP Hello Extension State of the hello mechanism: enabled or disabled
Hello Interval Hello interval, in seconds
Max Hello misses
Maximum number of consecutive hello losses before
a neighbor is considered dead
Path and Resv message refresh interval
Path and reservation message refresh interval, in
seconds
Path and Resv message refresh retries count Number of Path and Resv message retransmissions
Blockade Multiplier Blockade multiplier
Graceful Restart State of GR: enabled or disabled
Restart Time GR restart interval in seconds
Recovery Time GR recovery interval in seconds
# Display the RSVP-TE configuration on interface VLAN-interface 3.
<Sysname> display mpls rsvp-te interface ethernet 1/1
Interface Vlan-interface3
Interface state: UP BFD feature: ENABLE
Total-BW: 80 Used-BW: 20
Hello configured: NO Num of Neighbors: 1
SRefresh feature: ENABLE SRefresh Interval: 30sec
Authentication: DISABLE Reliability configured: NO
Retransmit Interval: 500msec Increment Value: 1
Table 50 Command output
Field Description
Interface RSVP-TE enabled interface
Interface state Physical interface state
BFD feature State of BFD: enabled or disabled.
Total-BW Total bandwidth (in kbps).
Used-BW Used bandwidth (in kbps).
Hello configured State of the hello mechanism: enabled or disabled.
Num of Neighbors Number of neighbors connected to the interface.
Srefresh feature State of the summary refresh function: enabled or disabled.
Srefresh interval Summary refresh interval (in seconds).
To Next Page
Loading...
Need help?
General
