HP 5800 Series

43
ipv6-prefix ipv6-prefix-name: Specifies an IPv6 address prefix list by its name, which is a string of 1 to 19
characters.
direct: Filters direct routes to be advertised.
isisv6 process-id: Filters IPv6 ISIS routes to be advertised that are from a specific IPv6 ISIS process. The
process-id parameter is ranging from 1 to 65,535.
ospfv3 process-id: Filters OSPFv3 routes to be advertised that are from a specific OSPFv3 process. The
process-id parameter is ranging from 1 to 65,535.
ripng process-id: Filters RIPng routes to be advertised that are from a specific RIPng process. The process-
id parameter is ranging from 1 to 65,535.
static: Filters static routes to be advertised.
Examples
# In BGP-VPNv6 subaddress family view, use ACL 2555 to filter routes to be advertised by MP-BGP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] filter-policy 2555 export
filter-policy import (BGP-VPNv6 subaddress family view)
Description
Use the filter-policy import command to filter received routes.
Use the undo filter-policy import command to remove the configuration.
By default, received routes are not filtered.
Only routes that survive the filtering are added into the BGP routing table.
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
BGP-VPNv6 subaddress family view
Default level
2: System level
Parameters
acl6-number: Specifies the IPv6 ACL number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies an IPv6 address prefix list by its name, which is a string of 1 to 19
characters.
Examples
# In BGP-VPNv6 subaddress family view, use ACL 2555 to filter received routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6