13
Field Description
OutInterface Forwarding interface
Token LSP index number
display fib vpn-instance ip-address
Description
Use the display fib vpn-instance ip-address command to display the FIB information for the specified VPN
instance that matches the specified destination IP address.
If you do not specify either the mask or the mask-length parameter, the command displays the FIB
information for the specified VPN that matches the specified destination IP address and has the longest
mask. Otherwise, the command displays the FIB information for the specified VPN that exactly matches
the specified destination IP address and mask.
Syntax-
display fib vpn-instance vpn-instance-name ip-address [ mask | mask-length ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the instance name of a VPN, which is a case-sensitive string of 1 to 31
characters.
ip-address: Specifies the destination IP address, in dotted decimal format.
mask: Specifies the mask of the IP address, in dotted decimal format.
mask-length: Specifies the length of the IP address mask, ranging from 0 to 32.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the FIB information for VPN instance vpn1 that matches the destination IP address 10.2.1.1.
<Sysname> display fib vpn-instance vpn1 10.2.1.1
FIB entry count: 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination/Mask Nexthop Flag OutInterface InnerLabel Token
To Next Page
Loading...
Need help?
General
