HP 5800 Series User Manual

167
Examples
# Enable summary refresh on VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] mpls rsvp-te srefresh
mpls rsvp-te timer graceful-restart recovery
Description
Use the mpls rsvp-te timer graceful-restart recovery command to set the RSVP-TE GR recovery interval.
Use the undo mpls rsvp-te timer graceful-restart recovery command to restore the default.
By default, the RSVP-TE GR recovery interval is 300 seconds.
Before using this command, be sure to enable the GR capability for MPLS RSVP-TE.
Syntax
mpls rsvp-te timer graceful-restart recovery recovery-time
undo mpls rsvp-te timer graceful-restart recovery
View
MPLS view
Default level
2: System level
Parameters
recovery-time: Specifies the RSVP-TE GR recovery interval in seconds, ranging from 60 to 300.
Examples
# Set the RSVP-TE GR recovery interval to 100 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer graceful-restart recovery 100
mpls rsvp-te timer graceful-restart restart
Description
Use the mpls rsvp-te timer graceful-restart restart command to set the RSVP-TE GR restart interval.
Use the undo mpls rsvp-te timer graceful-restart restart command to restore the default.
By default, the RSVP-TE GR restart interval is 120 seconds.
Before using this command, be sure to enable the GR capability for MPLS RSVP-TE.
Syntax
mpls rsvp-te timer graceful-restart restart restart-time
undo mpls rsvp-te timer graceful-restart restart
View
MPLS view

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)