HP 5800 Series User Manual

125
Field Description
Local Discr Local discriminator of the BFD session
Remote Discr Remote discriminator of the BFD session
Session State Status of the BFD session, which can be Init (initializing), Up, or Down
Source IP IP address of the active end (ingress LSR) of the BFD session
Session Role Role of the LSR in the BFD session, Active or Passive
display mpls rsvp-te
Description
Use the display mpls rsvp-te command to display RSVP-TE configuration.
If the interface keyword is not specified, the global RSVP-TE configuration is displayed.
If you do not use the interface-type interface-number parameter to specify an interface, the RSVP-TE
configuration of all RSVP-TE enabled interfaces is displayed.
Syntax
display mpls rsvp-te [ interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ] ]
View
Any view
Default level
1: Monitor level
Parameters
interface: Displays RSVP-TE configuration for interfaces.
interface-type interface-number: Specifies an interface for which RSVP-TE configuration is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the global RSVP-TE configuration.
<Sysname> display mpls rsvp-te
LSR ID: 4.4.4.4
Resv Confirmation Request: DISABLE
RSVP Hello Extension: ENABLE
Hello interval: 3 sec Max Hello misses: 3
Path and Resv message refresh interval: 30 sec
Path and Resv message refresh retries count: 3

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)