37
Field Description
Peer support bgp route refresh
capability
The peer supports route refreshing.
Address family IPv6 Unicast IPv6 unicast family capability.
Received
Total number of received messages and the number of received update
messages.
Sent
Total number of sent messages and the number of sent update
messages.
Maximum allowed prefix number Maximum number of routes that the VPN instance supports.
Threshold
Threshold for warning. When the percentage of the number of the
received route prefixes to the maximum number of routes supported
reaches this value, the device generates a prompt.
Minimum time between
advertisement runs
Minimum interval between route advertisements.
Optional capabilities Local optional capabilities.
Route refresh capability Whether route refreshing is enabled.
Peer Preferred Value Preference value specified for routes from the peer.
display bgp vpnv6 vpn-instance routing-table
Description
Use the display bgp vpnv6 vpn-instance routing-table command to display the BGP VPNv6 routing
information of the specified VPN.
Syntax
display bgp vpnv6 vpn-instance vpn-instance-name routing-table [ network-address prefix-length [ longer-
prefixes ] | peer ipv6-address { advertised-routes | received-routes } ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the VPN instance name, which is a case-sensitive string of 1 to 31
characters.
network-address: Specifies the IPv6 address of the destination network segment.
prefix-length: Specifies the length of the prefix, ranging from 0 to 128.
longer-prefixes: Displays each routing entry that meets the following conditions:
• Its destination IPv6 address ANDed with the specified prefix equals the specified destination IPv6
address ANDed with the specified prefix.
• Its prefix length is shorter than or equal to the specified prefix length.
To Next Page
Loading...
Need help?
General
