HP 5800 Series User Manual

45
Syntax
ipv6-family
undo ipv6-family
View
VPN instance view
Default level
2: System level
Parameters
None
Examples
# Enter IPv6 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] ipv6-family
[Sysname-vpn-ipv6-vpn1]
refresh bgp ipv6 vpn-instance
Description
Use the refresh bgp ipv6 vpn-instance command to soft reset IPv6 BGP connections in a VPN instance.
Syntax
refresh bgp ipv6 vpn-instance vpn-instance-name { ipv6-address | all | external } { export | import }
View
User view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the name of the VPN instance, which is a case-sensitive string of 1 to 31
characters.
ipv6-address: Soft resets the BGP connection with the BGP peer identified by this IPv6 address.
all: Soft resets all IPv6 BGP connections in the specified VPN instance.
external: Soft resets EBGP sessions.
export: Performs a soft reset in the outbound direction.
import: Performs a soft reset in the inbound direction.
Examples
# Soft reset all IPv6 BGP connections in VPN instance vpn1 in the inbound direction to make new
configurations take effect.
<Sysname> refresh bgp ipv6 vpn-instance vpn1 all import

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)