HP 5800 Series - Display Bgp Vpnv6 Route-Distinguisher Routing-Table

33
Path/Ogn AS_PATH attribute/route origin of the route
# Display all BGP VPNv6 route statistics.
<Sysname> display bgp vpnv6 all routing-table statistic
Total number of routes from all PE: 1
Total routes of vpn-instance vpn1: 2
Table 12 Command output
Field Description
Total number of routes from all PE Total number of VPNv6 routes from all PEs
display bgp vpnv6 route-distinguisher routing-table
Description
Use the display bgp vpnv6 route-distinguisher routing-table command to display the BGP VPNv6 routing
information of a specific RD.
Related commands: route-distinguisher.
Syntax
display bgp vpnv6 route-distinguisher route-distinguisher routing-table [ network-address prefix-length ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
route-distinguisher: Specifies the RD.
network-address: Specifies the IPv6 address of the destination segment.
prefix-length: Specifies the prefix length, ranging from 0 to 128.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the BGP VPNv6 routing information of RD 100:1.
<Sysname> display bgp vpnv6 route-distinguisher 100:1 routing-table